Can somebody help me design the best way to configure qos in the following scenario? and where to apply the qos policy?
2600xm router and Polycom video conference device
2600xm router and Polycom
Note: The remotes are connected using a ipsec tunnel from pix to pix and the 2600xm is in the inside doing GRE to the main router which is a 3660 which is connected via a ptop t1 to the location where the other 2600xm is.(2600>pix>pix>3660>2600).
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...