Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QoS implementation

Hi Guys,

I am trying to implement QOS between 2 sites

Brisbane router -------> point to point (with DCoS) ---------> Melbourne router

here is my configuration

Class-map match-all VideoTraffic

match access-group VideoTraffic

Class-map match-all VoiceTraffic

match access-group VoiceTraffic

Policy-map Tagging

Class VideoTraffic

set ip dscp ef

Class VoiceTraffic

set ip dscp af41

Policy-map QOS

Class VideoTraffic

bandwidth 2048

Class VoiceTraffic

priority 768

Class class-default

fair-queue

ip access-list extended VideoTraffic

Permit ip host <x.x.x.x (video conf. machine)> any

ip access-list extended VoiceTraffic

Permit Ip host <PABX IP> any

interface fast e 0/0 ( WAN Interface)

Bandwidth 4096

service-policy output QOS

interface fast e 0/1

service-policy input tagging.

when we applied the policy, i can see the traffic is classifed on show policy-map interface command. but video conf. machine showing packed drop.

I cannot see any packet drop on LAN and WAN interface.

is there anything wrong in config? do i need match protocol rtp video statement in class-map

VideoTraffic.

Please Help.

Thanks in advance.

1 REPLY

Re: QoS implementation

hi mate

try this match statement on the server conf

ip access-list video

permit udp host x.x.x.x(srv) any range 16383 32767

if ur video server already do marking it will be easier

then do this clas-map

class-map match-ANY video

match ip dscp af41

match access-group name video

then apply it in ur policy map

DONT FORGET TRY TO MAKE UR POLICY MAP IN OUTBOUND DIRECTION OK

good luck

Rate if useful

247
Views
0
Helpful
1
Replies