cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
567
Views
0
Helpful
3
Replies

QoS On 3640 and 3660 Router

d.thaker
Level 1
Level 1

Hi

I am using 3660 and 3640 router for doing Video over IP. I don't have problem in doing same but I am facing problem in monitoring of the same. I have applied policy map and when I am giving command " Sh policy-map " on 3640 it gives me more details while on 3660 it commands doesn't give me details.Also for the sh access-list I am not getting any output on 3660 router.While I am using same IOS version on both router then why it is happening ? Also on 1720 with same IOS I am facing problem. Can suggest me what IOS upgrade will solve this issue ?

Sh tech for 3640 router

TFIPL#sh tech

TFIPL#sh tech-support

------------------ show version ------------------

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3640-I-M), Version 12.1(5)T8, RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Mon 07-May-01 19:20 by ccai

Image text-base: 0x60008950, data-base: 0x60A28000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

ROM: 3600 Software (C3640-I-M), Version 12.1(5)T8, RELEASE SOFTWARE (fc1)

TFIPL uptime is 1 week, 5 days, 17 hours, 21 minutes

System returned to ROM by power-on

System image file is "flash:c3640-i-mz.121-5.T8.bin"

cisco 3640 (R4700) processor (revision 0x00) with 26624K/6144K bytes of memory.

Processor board ID 21460602

R4700 CPU at 100Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

4 Serial network interface(s)

4 Serial(sync/async) network interface(s)

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Moderator Note:

Log truncated due to size.

3 Replies 3

ssoberlik
Level 4
Level 4

From your show tech output I see that the 3640 and 3660 are running different IOS versions. There could be some problem with the image that you are running with the 3660. Just check out with the same version image as that of 3640.

You are right and I wants to close this case have resolve my problem.

beasystem
Level 1
Level 1

d-thaker

hello

can you help , i need upgrade my version to this

Image text-base: 0x60008950, data-base: 0x60A28000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

you have this image file can send for my email

fribook@gmail.com

my version is old 11.1(19)AA i need urgent upgrade to 11.1.(20)AA2

thank you

nice day

im waiting you return

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: