cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
857
Views
0
Helpful
3
Replies

qos trust cos or qos trust dscp?

mcombs
Level 1
Level 1

My core switches are a pair Cisco catalyst 4006s with a sup 4 module. The questions are:

1. Should I use qos trust cos or qos trust dscp when setting up qos on a per port basis?

2. Which is preferred?

3. I have a cos to dscp mapping so does it really matter?

Any help is greatly appreciated. I just want to make sure that I'm honoring all tags.

Mark

3 Replies 3

bwilmoth
Level 5
Level 5

If you have ip phones connected to the switch, you can enter qos trust cos on the switch and in the router which is connected to the switch enter the command to trust the DSCP since the switch will pass the dscp information to teh router.

http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m2.html#wp1015945

furionsky333
Level 1
Level 1

why ? I can't input command "mls qos trust dscp", instead of only input "qos trust dscp".

what difference between this two command?

thanks a lot

Hi

They are the same commands , the only difeerence the IOS supported commands. You will find also to trust cos instead of  mls qos trus cos . You also have to use auto qos default instead of auto qos voip trust.

Thank you

please rate all useful information

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: