Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Ready for VoIP?

Hi all,

is there overview from cisco about hardware and software requriements for implementing VOIP?

I must check if our network is ready for VOIP.

Thx

Taylan

2 REPLIES
Green

Re: Ready for VoIP?

If you are planning a full deployment of VoIP, in addition to verifying the equipment and software list, Id recommend doing end-to-end testing ... even if you control the entire network.

Agilent has a 'VoIP Quality Tester" that will give a full analysis of the endpoints. Buy one or rent one (or get a consultant that has one) .. having the right hardware/software is only the starting point; optimizing the overall network is probably going to be necessary ... lots of tweaking configs, routes, and loads.

I'd also recommend some serious prototype and piloting.

Good Luck

Scott

Cisco Employee

Re: Ready for VoIP?

It all goes by whay is the requirement behind using VoIP OR What exactly the goal behind using VoIP. Based on that the solution will be provided.

There are many solution available based on requirement. Visit following url for that

http://www.cisco.com/en/US/netsol/ns110/ns163/net_solution_home.html

On that link you will find many many solutions and related docs as well. Check on the left side tabs on that doc

257
Views
0
Helpful
2
Replies
CreatePlease to create content