Registering MCU via SCCP

[markanthony]

I have an IPVC-3515 which we use with H.323 gatekeeper. This has been working fine. I also see that I can use SCCP with this unit. Does anyone have any docs that explain how to do this? I am using CM4.0. What phone load would it try to tftp from CM and what type of phone would it try to register as?

Thx

[Brandon Buffin]

You would add it to CCM as a video conference bridge. The CCM configuration can be found here:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ecf8a.html#1057743

The IPVC configuration can be found here:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuvcm/release_5_1/3515/administration/guide/Protocols.html#wp2915457

Hope this helps. If so, please rate the post.

Brandon