Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Requested circuit/channel not available

I configured my voice gateway with MGCP outgoing calls in fine,

but ingoing calls from city:

I get Requested circuit/channel not available

un 13 09:34:06 10.66.4.2 163500: *Jun 13 05:25:46.904: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x00C7

Jun 13 09:34:06 10.66.4.2 163501: Sending Complete

Jun 13 09:34:06 10.66.4.2 163502: Bearer Capability i = 0x9090A3

Jun 13 09:34:06 10.66.4.2 163503: Standard = CCITT

Jun 13 09:34:06 10.66.4.2 163504: Transer Capability = 3.1kHz Audio

Jun 13 09:34:06 10.66.4.2 163505: Transfer Mode = Circuit

Jun 13 09:34:06 10.66.4.2 163506: Transfer Rate = 64 kbit/s

Jun 13 09:34:06 10.66.4.2 163507: Channel ID i = 0xA18381

Jun 13 09:34:06 10.66.4.2 163508: Preferred, Channel 1

Jun 13 09:34:06 10.66.4.2 163509: Progress Ind i = 0x8A81 - Call not end-to-end ISDN, may have in-band info

Jun 13 09:34:06 10.66.4.2 163510: Calling Party Number i = 0x00C3, N/A

Jun 13 09:34:06 10.66.4.2 163511: Plan:Unknown, Type:Unknown

Jun 13 09:34:06 10.66.4.2 163512: Called Party Number i = 0xC1, '3334578'

Jun 13 09:34:06 10.66.4.2 163513: Plan:ISDN, Type:Subscriber(local)

Jun 13 09:34:06 10.66.4.2 163515: Cause i = 0x80AC - Requested circuit/channel not available

Thanks in Advance

875
Views
0
Helpful
0
Replies
CreatePlease to create content