Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Routing & Switching

Hi,

I have found a message on the console of the router.This is the message

qtaxxd2>sh log

Syslog logging: enabled (1 messages dropped, 0 messages rate-limited, 1510 flush

es, 0 overruns)

Console logging: level debugging, 1345372 messages logged

Monitor logging: level debugging, 0 messages logged

Buffer logging: level debugging, 1334818 messages logged

Logging Exception size (8192 bytes)

Count and timestamp logging messages: disabled

Persistent logging: disabled

Trap logging: level informational, 1334823 message lines logged

Log Buffer (8192 bytes):

.12(16521) (RST)

Mar 19 14:22:34.997 PST: %TCP-6-BADAUTH: No MD5 digest from 202.125.135.141(179)

to 202.125.135.12(1652

Mar 19 14:22:37.313 PST: %TCP-6-BADAUTH: No MD5 digest from 202.125.135.108(179)

to 202.125.135.12(16522) (RST)

How do i overcome this message from my remote end VXR 7206 router.

regards

Salman Ahmad

1 REPLY

Re: Routing & Switching

Hi Salman

Check out your BGP peers for correct authentication key chain.

Do mirror your BGP/interface config onto the remote routers.

regds

116
Views
0
Helpful
1
Replies