Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Sending CDRs to two Radius servers simultaneously

Hello,

I want to send CDR's (vsa) to two Radius servers, I have added this to AS5350 gateway :

GW(config)# radius-server host 10.0.0.1 auth-port 1612 acct-port 1618 key rad1

GW(config)# radius-server host 10.1.1.1 auth-port 1812 acct-port 1813 key rad2

GW(config)# radius-server vsa send accounting

GW(config)# radius-server vsa send authentication

The problem is : the GW is sending CDRs to the first Radius only !. I want to send CDRs to two radius simultaneously.

What is wrong with my config ?

Thanks in advance.

2 REPLIES
Silver

Re: Sending CDRs to two Radius servers simultaneously

First enter the command

aaa group server radius

the enter the servers .

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hsec_r/sec_a1h.htm#wp1127647

New Member

Re: Sending CDRs to two Radius servers simultaneously

Thanks thomas.chen,

I tried to apply it to my gw:

as5400(config)#aaa group server radius billing

as5400(config-sg-radius)#server 1.1.1.1 auth-port 1700 acct-port 1701 ?

auth-port UDP port for RADIUS authentication server (default is 1645)

there is no "key" command, how can do to specify a radius secret key for eatch radius server ?

Thank you in advance.

151
Views
0
Helpful
2
Replies
CreatePlease to create content