Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Setup Cisco IP/TV on 6509 w/ MSFC 2 cards.

I need to configure my 6509's so I can have my 2 cisco IP/TV servers running on 10.192.130.x/24 vlan and my users should be able to watch the tv who are on 10.192.132.x/23 vlan.

I need to find out what needs to be setup where and how.

Thanks for any all the help.

-Rajeev

1 REPLY
Community Member

Re: Setup Cisco IP/TV on 6509 w/ MSFC 2 cards.

router# config term

router(config)# ip multicast-routing

router(config)# int ethernet 1

router(config-if)# ip pim dense-mode

router(config-if)# int ethernet 3

router(config-if)# ip pim dense-mode

The above are the basic commands used to enable multicasting in a Router. In Cisco 6509 the multicasting has to be enabled.

The following link has the multicast configuration for Cisco 6509

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_5_3/cofigide/multi.htm#xtocid5220

246
Views
0
Helpful
1
Replies
CreatePlease to create content