Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

show voice port summary

Hello,

I ran a show voice port summary at the router and notice some of the channels uner OPER are listed as none instead of "norm".

                                           IN       OUT

PORT            CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC

=============== == ============ ===== ==== ======== ======== ==

0/0/0:23        01  xcc-voice   up    up   none     none     y

0/0/0:23        02  xcc-voice   up    up   none     none     y

0/0/0:23        03  xcc-voice   up    dorm none     none     y

0/0/0:23        04  xcc-voice   up    dorm none     none     y

0/0/0:23        05  xcc-voice   up    dorm none     none     y

0/0/0:23        06  xcc-voice   up    dorm none     none     y

0/0/0:23        07  xcc-voice   up    dorm none     none     y

0/0/0:23        08  xcc-voice   up    dorm none     none     y

0/0/0:23        09  xcc-voice   up    none none     none     y

0/0/0:23        10  xcc-voice   up    none none     none     y

0/0/0:23        11  xcc-voice   up    none none     none     y

0/0/0:23        12  xcc-voice   up    none none     none     y

0/0/0:23        13  xcc-voice   up    none none     none     y

Any information is appreciated

Mark

1273
Views
0
Helpful
0
Replies