Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

SIP phone lost registration on CCME

I use CCME 4.1 with dlink DPH-300S SIP IP phone.

All works fine, but ip phone after same time unregistred from CCME and user should manually register phone again.

Can I configure CCME to avoid proccess re-registring SIP ip phone?

My conf:

voice service voip

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

supplementary-service h450.12

fax protocol none


registrar server

voice register global

mode cme

source-address port 5060

max-dn 20

max-pool 58

time-format 24

date-format D/M/Y

file text

create profile sync 0407455740166572


voice register dn 10

number 2003

allow watch


label 592613



voice register pool 10

id mac 001B.111E.1D33

number 1 dn 10

dtmf-relay sip-notify

username user password user

codec g711ulaw

Thank you very much

Hall of Fame Super Gold

Re: SIP phone lost registration on CCME

I have the same issue with a Siemens phone. it worked fine for months, now mysteriously the registration is lost after some time.

I had not got the time to troubleshoot the root cause of that, perhaps you can, by looking at "debug ccsip message" with "term mon".

A possible workaround would be configuring a voip DP pointing to the phone's address.

EDIT: I see that your config, username is not same as number, well for precaution, make it so it is.

Re: SIP phone lost registration on CCME

I disclose that Ip phone unregistred exactly as set in

voice service voip


registrar server expires max 120 min 60

The max time is one day... Can I change this situation?

Hall of Fame Super Gold

Re: SIP phone lost registration on CCME

Try lowering the min and check with debug that phone is periodically refreshing. Most phones do that every minute or so.

CreatePlease to create content