Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SRST and Gateway selection

I have a remote site running SRST back to a 4.x CallManger and I am trying to figure out what is the best gateway to run MGCP or H323, the router will need dial peers, so that is can dial out when is SRST mode. What is the best gateway type to use

1 REPLY
Silver

Re: SRST and Gateway selection

The main criteria for selecting MGCP over H323 is the ease of administration of dial plan. With MGCP, you can do a centralized administration using Callmanager. With H323, you would need to do this at each gateway independantly.

When it comes to SRST, anyways you would need to setup the dial-peers for fallback purposes. If you have a straight forward dial-plan, then you will be better off doing it using dial-peers.

If your dial-plan is complex, then it would be better to use MGCP when in normal mode and you can use a simple dial-peer in fallback mode.

regards,

Anup

114
Views
3
Helpful
1
Replies
CreatePlease login to create content