Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

T1 ISDN PRI configuration on cisco 3640 with NM-HDV-2t1-48

Hi guys, please I need help on how to configure ISDN PRI T1 on the NM-HDV-2T1-48 on cisco 3640, if you do how? Also I want to know if its supported.

Thank you,

Layer3

3 REPLIES
Cisco Employee

Re: T1 ISDN PRI configuration on cisco 3640 with NM-HDV-2t1-48

Not sure how you want to configure it - what are the end points?

How to Configure MGCP with Digital PRI and Cisco CallManager

http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00801ad22f.shtml

Configure a Cisco IOS Software Voice-enabled Router as an H.323 Gateway

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094636.shtml#iosvoice

New Member

Re: T1 ISDN PRI configuration on cisco 3640 with NM-HDV-2t1-48

I wish to connect 2 pbx equiped with isdn PRI interface (E1) by a gatheway.Normally the user behind the pbx will be able to send a call voice and fax to another user in another pbx. Near the 2 pbx there are ip network.

Can i use two routers equiped by NM-HDV-1E1-30E and connect the cisco by ip, and configure dial-peer and channel.

Any suggest will be appreciated .

Cisco Employee

Re: T1 ISDN PRI configuration on cisco 3640 with NM-HDV-2t1-48

Configuring Connection Trunk for VoIP Gateways

http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00800afd65.shtml

watch your dial peers - it's tricky and counter intuitive.

271
Views
0
Helpful
3
Replies