Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Tandberg EX90 status unregistered with cucm7.1.5

Hi Experts,

i was registering 2 Tandberg EX90  with cucm7.1.5 as third party sip(advance) , created sip profile and associated with the user,partition,phone button template,css,device pool,sip secure profile and 1 device got registered successfully and the other device registered for a second and getting unregistered .can anybody provide me the solution for this type of issue what is the workaround ..i tried to delete the device and configure again but same issue.thanks in advance..

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Tandberg EX90 status unregistered with cucm7.1.5

8.6 is supported on 7825I4 server, see the matrix:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

Alos, there is a direct upgrade from 7.1.5 to 8.6

HTH, please rate all useful posts!

Chris

4 REPLIES
New Member

Tandberg EX90 status unregistered with cucm7.1.5

the version may be the latest version5  can you please provide me the configuration documents for EX90 with CUCM 7.1.5, SIP Trunk and configuration on Voice GatewayH323 codecs,dialpeer if required etc.. for site video calls with the branch sites I am new to this technology.I really appreciate if any help provided.

Hall of Fame Super Silver

Re: Tandberg EX90 status unregistered with cucm7.1.5

How about upgrading CUCM to 8.6 and registering it natively?

Sent from Cisco Technical Support iPad App

New Member

Re: Tandberg EX90 status unregistered with cucm7.1.5

for upgrading cucm from 7.1.5 to 8.6 do i need to have a new mcs server or i can upgrade it on the present mcs 7825i4, does  direct upgrade is possible for version 7.1.5  to 8.6.Thanks

Hall of Fame Super Silver

Tandberg EX90 status unregistered with cucm7.1.5

8.6 is supported on 7825I4 server, see the matrix:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

Alos, there is a direct upgrade from 7.1.5 to 8.6

HTH, please rate all useful posts!

Chris

628
Views
0
Helpful
4
Replies