Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Tandberg multipoint with CCM and Gatekeeper

We are having issues using the inbuilt Multipoint codec on the Tandberg 880mxp units. all tandbergs register to 2 Gatekeepers (12.4.4 T2) with a CCM doing all the call control and BW as well.

They do not want to use and external MCU

3 REPLIES
New Member

Re: Tandberg multipoint with CCM and Gatekeeper

What version of CallManager, SR, and OS are you running?

What is your gatekeeper platform?

What version of SW are you running on your Tandberg endpoints? Latest and greatest?

New Member

Re: Tandberg multipoint with CCM and Gatekeeper

Version of callManager is 4.1

Gatekeeper Platform is 2800 Software (C2800NM-IPVOICE_IVS-M), Version 12.4(4)T2

Tandberg Release is F5.3 on the 880 MXP (not the latest or greatest)

New Member

Re: Tandberg multipoint with CCM and Gatekeeper

Have attached Gatekeeper Config logs from gatekeeper of 3rd call failing and also with calls proceeding with 3rd call failing on the end

397
Views
0
Helpful
3
Replies
CreatePlease to create content