I have a solution with a hybrid bridge and an endpoint that are in the same VLAN but the Endpoint drops around 20 minutes every time. In the Firewall logs i see the Endpoint sending packets for the bridge to the firewall in stead of just directly to the bridge. It seems like the Endpoint looses it's ARP resolution of the Bridge and tries to route to the Gateway even though the Bridge is on the same subnet. Has anyone seen this?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...