Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Telepresence implementation

CTI-TMS-SW-K9Cisco TelePresence Management Suite   Includes 10 Systems=1 qty
CTS-SX20-PHD12X-K9SX20 Quick Set HD  NPP  12xPHDCam  1 mic  remote cntrl =3 qty
BE6K-ST-BDL-K9=Cisco BE6000 Medium Density Server  Export Restricted SW =2 qty
CP-DX80-K9=Cisco DX80 =9 qty
CTI-5320-MCU-K9Cisco TelePresence MCU 5320 up to 40 SD ports=1 qty

 

suggest me how to design for above BOQ,by considering above boq i suspect i need to install Following VM in BE6K

1) VCS-C&E

2) TMS

3)CUCM 

Does VCS supports coresident? How to make a design for this BOQ?

 

 

 

 

 

 

 

2 REPLIES
Highlighted
Community Member

Any suggestion?

Any suggestion?

VIP Purple

I suggest you start with the

I suggest you start with the Deployment Guides.

Given that your call control will need to be a CUCM (to support the DX80s as they won't register to a VCS) - you should be looking at the Expressway-Core and Expressway-Edge products, and not the VCS-Control/Expressways - unless you also need to integrate to legacy or third party devices that aren't supported by CUCM.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
180
Views
4
Helpful
2
Replies
CreatePlease to create content