Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Trancoding with IPVC-3540-MC10A

I see there are transcoder options for the MC03 and MC06 MCU but none for the MC10A. How do I provide transcoding for this MCU?

2 REPLIES
New Member

Re: Trancoding with IPVC-3540-MC10A

The IPVC-3540-MC10A can use the same transcoding card as the IPVC-3540-MC06A - the XAM06. In the past we have not used a transcoding card on the MC10A blade as the ratio of transcoded ports to available ports was very low - 15 ports to 100 available ports. This is the same capacity that you will get with the XAM06 as well.

We are currently looking at increasing the transcoded ports to 32 for the XAM06 and what will be the XAM10. Plans are to make the XAM10 available sometime in the 3QR 2003

New Member

Re: Trancoding with IPVC-3540-MC10A

Has the XAM10 been available yet ? Can you tell me where to get the document showing that the IPVC-3540-XAM06 is compatible with the IPVC-3540-MC10A ?

125
Views
0
Helpful
2
Replies
CreatePlease login to create content