Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VG 224 Voice Gateway using MCGP or fax

Does anyone have a experience or a config for running MGCP on a VG224 voice gateway (using it for inbound/outbound fax)to Call Manager? I've set up SCCP and it worked initially but in production it drops calls and does not respond after reboot without re-enabling SCCP and STAPP

2 REPLIES
Super Bronze

Re: VG 224 Voice Gateway using MCGP or fax

I deployed 5 of these to service a mix of phones and faxes a few months ago using MGCP.

I used fax passthrough; we've had 0 problems so far with the setup.... customer has had several power cuts and no startup problems.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: VG 224 Voice Gateway using MCGP or fax

we have CCM 4.3(1)SR1 and VG224 in use and it works with attached configuration.

158
Views
0
Helpful
2
Replies