Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

VIC

How can i select VIC'S for CISCO 2801 and 2811 Routers? what need to be considered?

1 REPLY
Super Bronze

Re: VIC

Hi

You need to first consider what you need the VICs for - i.e. what type of PSTN circuits are available to you, how many channels you need, etc.

You then need to select an appropriate card that is compatible with your router - for a 28xx this is typically a VIC2-something, but check here : http://www.cisco.com/en/US/partner/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml

Finally, depending on the number of channels you need, you then specify PVDM modules : http://www.cisco.com/cgi-bin/Support/DSP/cisco_prodsel.pl

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
266
Views
0
Helpful
1
Replies
CreatePlease to create content