Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Video Backhaul

I am looking for any equipment to backhaul MPEG 2 Video streams over ATM or IP. The compression standard is 4:2:2 or 4:2:0 , and the data rates can vary. I would also need the necesary decoders at the other end.

2 REPLIES
Green

Re: Video Backhaul

Check out AG Systems. We used the VIA-188 on several occasions for MPEG2 (4:2:2) over OC3/ATM.

They also had interfaces for 25Meg copper ATM, and other flavors.

It was a while ago, I don't know if they still make'em or not.

Cisco IPTV works ok for MPEG 1 / 2, you can have several en/decoders per server, if necessary.

VBrick is also a very nice alternative. I don't recall if they have an ATM flavor, I believe they do.

VBrick has encoders, decoders, or combined function for MPEG 1, 2, or 4. You can build the distribution network as necessary.

Good Luck

Scott

New Member

Re: Video Backhaul

Use Tandberg gear for this.

www.tandbergtv.com

291
Views
0
Helpful
2
Replies
CreatePlease to create content