Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Video Calls Cisco 9971

Guys,

I am trying to make video calls via the Cisco 9971 to another 9971 on the same cluster but am not able to make a video call at all.

Any ideas on how I would set this up or point me in the right direction on how setting this up

Im running CCM Version System version: 7.1.5.10000-12

Cisco 9971 Firmware version: sip9971.9-0-2

Under Phone configuration > Product Specific Configuration Layout > Cisco Camera has been enabled and so has video capabilities.

But am not able to make a video call side by side from one to another and vice versa.

Kunal Patel

Everyone's tags (3)
4 REPLIES
New Member

Re: Video Calls Cisco 9971

Hi.. I'm using CUCMBE 7.1.3

My CUCMBE upgrade to  Engineering Special 7.1(3.33030.1),

Cisco 9971 Firmware version: 9971.9-0-3

and Video Call between 9971 is running well.

Thanks.

If this helps, please rate.

New Member

Hi Kunal, Have been able to

Hi Kunal,

 

Have been able to solve this issue?

 

I'm facing the same problem.

 

Best regards,

Alcides

New Member

My problem was solved the

My problem was solved the onder video where not enabled. :-)

New Member

Hi, do you also set enough

Hi,

 

did you also set enough bandwidth between the locations and enabled Video in the regions?

 

3918
Views
0
Helpful
4
Replies
CreatePlease login to create content