We are having CCM4.1(3)at central location.In branch location we are having CCME 4.0(2).Both the locations are connected through leased circuit. We enabled Video on IP Phone which is registered to CCM and also we configured CCME for video. When we start doing video conferencing between these two location, it's not happenning. In VT advantage it is showing local image on Local & Remote screen. I don't know what is the problem.
Can you guys please tell me wheather Video Conferencing will work between CCM & CCME over the leased circuit using VT Advantage.
If it works, please tell me what are configuration parameters i need to configure on CCM & CCME.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...