I would like to set up video conferencing for our company. Ideally we are looking for the ability for internal users to use CUVA with their IP Phones (which they can currently do), with the ability for other companies to also connect - I'm guessing through a gateway device. Multiparty conferences are required. We also have a few Tandberg H.323 devices in meeting rooms which would be good to be included. What would be required for this setup? Is a Cisco Unified Videoconferencing 3515 Multipoint Control Unit (MCU) all that is required or is there additional requirements? Your thoughts, etc would be appreciated.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...