Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

video conferencing

I have experience in Cisco CME for voice and I have several instalations.

Now I want to add video conferencing between several users.

Is it possible to integrate it as a Cisco Call manager express user? How can I implement it? Which are the terminal I need to use?

Regards

2 REPLIES
Cisco Employee

Re: video conferencing

Cisco VT Advantage is supported as of Call Manager Express 4.0. You will need an IOS release of atleast 12.4(9)T "ipvoice", Cisco VT Advantage Video Cameras & a 796x/4x series phone with an integrated switch.

Video will need to be enabled on the CCME platform under "telephony-service" using the "service phone videoCapability 1" command.

Then you will need to enable each phone to support video as follows:

phone 1

device-security-mode none

video

mac-address xxxx.xxxx.xxxx

type 7960

button 1:11 2:16

I have attached a link that shows a working configuration.

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps5662/products_configuration_example09186a0080725c15.shtml#intro

New Member

Re: video conferencing

Ok thanks for your response, but what is the integrated switch? Do you have any picture?

114
Views
4
Helpful
2
Replies