video dynamic secondary channel binding through E1 PRI in voice gateway
I have 2800 VG/GK equipped with E1 PRI. Tandberg video units are registered to the gatekeeper which is confiured on same gateway.
I am unable to bind dynamically secondary channels to the incoming video calls on primary numbers.
Pls. suggest me anyone is aware of dynamic secondary channel binding configuration for incoming video calls via E1 PRI gateway. my IOS version is 12.4(15)T3. Video call is establishing in only one channel (64Kbps)
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...