Re: Video Over VPN between CCM and CCME using Trunk
By default all IP traffic is permitted through a VPN tunnel except broadcast and multicast traffic. It basically is a matter of how the video software you are using works. If it is a multicast application then it will not work through an ipsec tunnel, if it is a unicast application then it should be able to work.
Also if this video is on the Internet tries to enable split tunnel on the VPN endpoint. Now if the issue is with a video that is on the PC, this might be because a software corruption of the OS, so try reinstalling the VPN Client software
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...