Im new to the whole VOIP area and the UC520 so I would appreciate some help.
I have set up the UC520 which was fairly simple but I get a Select Vlan ID error in the telephony voice section of CCA. When I try to select a VLAN the drop down list is emtpy and it prevents me from saving any other information associated with the user and analog extentions etc.
I have changed the Data Vlan 1 to a different subnet but left the phone VLAN 100 as it was.
I did read somewhere that the CCA will error if you change the default VLAN's. the interesting thing is the information for the VLAN is all there just no VLAN ID. can anyone tell me a work around.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...