Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Voice and DATA VLAN Configuration on a single port w/o QOS

Hello,

We have Cisco 3750 stack switches with POE capabilities, we want to deploy VOIP in our environment.

We will be using the same stack for connecting POE phones (polycom CX 600) and data port of users. we want o cascade the phone and PC on the same switch port. we do not want to use QOS in this deployment.

Wanted to confirm the switch port configuration that the switch port must have for achieving this.

We will be using Microsoft Lync for our VOIP service.

We are currently thinking of using the following configuration on a switch port for connecting both IP Phone and PC:

interface range fastEthernet 2/0/1-23, fastEthernet 3/0/1-47

switchport

switchport mode access

switchport voice VLAN 531

switchport access vlan 502

spanning-tree portfast edge

no shut

exit

Kindly confirm if this will work fine or not.

  • Video Over IP
2 REPLIES
New Member

Re:Voice and DATA VLAN Configuration on a single port w/o QOS

I have never used that voip service but that it's the same configuration we use on each switchport.


Sent from Cisco Technical Support Android App

New Member

Re:Voice and DATA VLAN Configuration on a single port w/o QOS

Enabling LLDP on the switch solved the issue.

Now the phones and the systems are getting IPs from correct VLANs.

787
Views
0
Helpful
2
Replies
This widget could not be displayed.