Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VOIP local breakout over ISDN

I am unable to do a local breakout from a voip phone using a "9", I always get the BT message "the number you have dialled has not been recognised".

On the BRI channels I have the following messages

*Feb 13 17:30:18.329 GMT: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/2/1, TEn

*Feb 13 17:30:18.337 GMT: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/2/0, TEn

*Feb 13 17:30:18.357 GMT: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/2/1, TEI p

*Feb 13 17:30:18.365 GMT: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/2/0, TEI p

Please any ideas???????????

1 REPLY
Hall of Fame Super Gold

Re: VOIP local breakout over ISDN

What do you mean by breakout?

Please post output of debug 'isdn q931' and 'term mon', make sure the output is not truncated like in the above.

741
Views
0
Helpful
1
Replies
CreatePlease to create content