Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VOIP plus NAT

System (1): 3640 with T1 interface, IOS 12.2(7),

System (2): Other Brand VOIP Gateway with E&M interface.

Connection: (1)--Checkpoint NG--Internet--Checkpoint NG--(2)

Description: We use checkpoint firealls to process NAT for both system which have private address only. Now I can make phone connection but only get one way voice. In the firewall's log, it shows all traffic are passed completely. I am not sure whether this case is realted to NAT or not. But similar case wroks without NAT process.Please help!

Any comment will be appreciated.

2 REPLIES

Re: VOIP plus NAT

You may have already tried this but can you ping the IP phone from the other side? One way voice is sometimes the result of a routing issue. The packets can get to the phone on the other side but don't know how to get back.

Also try this:

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml

New Member

Re: VOIP plus NAT

Sorry, the system (2) should be using FXO module.

I can do ping tests successfully from the VOIP gateways.

Moreover, I want to understand that is there any difference between E&M and FXO module when I want to perform a NAT VOIP call?

125
Views
0
Helpful
2
Replies