Is there any tools/commands available for Cisco 2621XM (2600 series), with which we can measure the voice quality of VOIP and TDM calls. Is it possible to get some statistical information about the voice call.
What are the metrics used by Cisco for measuring Voice Quality?
Any links, answers and suggestions would be helpful.
IP SLA is a feature built in to IOS and collects voice quality statistics. See the links below. There are also many 3rd party applications which will allow you to compile and analyze these statistics. Several of these are listed at the bottom of the first link below. The main metrics used to measure voice quality are latency, jitter, and packet loss in the network. IP SLA can also measure the MOS (Mean Opinion Score) which is a standard used across TDM and IP voice networks.
Cisco IOS IP Service Level Agreements for Voice over IP
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...