One of my clients purchased a 3511e MCU and has over 15 VT advantage ip cameras. Is it possible to setup the video conferencing such that every single participant is seen in a seperate video window (as opposed to the loudest speaker)? When configuring the MCU, i see the option for "Dynamic Layout". This is EXACTLY what the customer wants, instead all they get is the loudest speaker. If this is not possible with VT Advantage, then i would appreciate someone pointing me in the direction of a product that will allow the customer to see all users in seperate video windows. Thanks
I don't think you can all the speakers in separate video windows. However, a Continuous Presence (CP) layout combines all the separate video streams and arranges them within a single layout (and possibly highlighting the active speaker, or placing them in a larger portion of the screen), and then sends the single video stream back to all participants.
Continuous Presence is currently running.. however the quality is horrible. QoS is not an issue here becuase we were testing this as a demo on a seperate LAN that was just running callmanager and the ip phones + cameras. If two people are talking at the same time, the images get molded into each other and you can't tell who's talking. The active speaker has to talk for at least 20 seconds before his picture is clearly presented. That's why i'm asking if it is possible to display all participants in seperate windows. Also, if the Dynamic Layout is available on the MCU, why can't i use it?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4