I've openned a TAC case for this and MTP needs to be unchecked for video to work apparently. However, when MTP is unchecked, the phones needs to be able to reach each other because the calls are not terminated via CM then. My setup has yet to work because there was some firewall and routing issues in between.
Our issues are not MTP related...voice works fine.
We do have a TAC case open, and they are focusing on the camera software... VTA 2.1, or 2.0.3 ....not sure what we're using at the moment.
I will say that TAC tested our setup in lab....and had the same problem we had. So the WAN is definitely not the problem.
I can't believe there are not more posts about inter-clusters trunks and VTA. Surely customers are, and have an expectation of, using VTA between different clusters....within a single company or with their business partners.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...