I am having the callmanager 4.1(3)SR1, Cisco 7941 IP Phone. Voice is working good. but i am trying to install VT Advantage , but it is showing only local video it is not showing remote video. I enabled the video over phone feature in call manager also. i am not able to find the problem . one more thing i am having the Cisco VT advantage software and Cisco UNIfied Video advantage . i tried with both the video softwares. its useless. PLZ anyone help me. thanx in advance.
Make sure that you have configured your Regions for video bandwidth as described in the following link and that you have sufficient bandwidth allocated in you Locations configuration to allow video calls.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...