The Cisco Unified Video Advantage application residing on the user's PC supports the classification of video packets using DSCP and, therefore, only at Layer 3. The current best practices for Cisco Unified Communications design recommend that the upstream Ethernet switch to which the phone is attached should be configured to trust the 802.1p CoS from the phone. Because the PC packets are unlikely to have an 802.1Q tag, they are unable to support 802.1p CoS bits.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...