Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

What is best QOS mechanism for VOIP in just a transport fashion?

We are using the PA-VXB-2TE1+ board in two 7206 routers that are connected together with 100mb afstethernet. PBXs are plugged into the PA slots and we are using the 100mb FE to transport VOIP packets along with normal data IP traffic. What is the best method to set up QOS to ensure the VOIP packets have a committed bandwidth?

Would you point me to some examples of the type of QOS I should use in this case? I'm running IOS 12.2(13a).

1 REPLY
Silver

Re: What is best QOS mechanism for VOIP in just a transport fash

Packet marking and conjestion management/avoidance for your VOIP traffic is what will do your QOS functions for you. There are a zillion ways, depending on your requirements, you can implement this. I'd start with the service policies and policy and class maps to get you what you need. Here are some links to help you on your way.

http://www.cisco.com/warp/customer/105/wantqos.html

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120xe/120xe5/mqc/mqcfm/pmark.htm#xtocid2634614

Modular QOS (very good)

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800bd908.html

Hope this helps you,

Don

140
Views
0
Helpful
1
Replies