Re: what is the difference Between CCM 3.3 , CCM 4.X and CCM 5.X
CALLMANGER 3.3 HAS LImited funtionality as compare to Callmanager 4.1.3 or 5
Normally Clients that I work with that use CM 4 are working with H323 or MGCP protocol, you can do Sip trunks with CM4,but when I see CM5 the client is providing end to end solution so they need SIP which is what Callmanager 5 differs from callmanger 3 an 4. but there is also Callmanager 6 !
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...