Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Which Ports do MCU and Call Manager use for Video?

Hi, Does anyone know which ports the MCU and call Manager Use when using the 3511 MCU box with Call Manager 4.1.3. I am looking to open the appropriate ports on the firewall.

Regards

Dominic

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Which Ports do MCU and Call Manager use for Video?

Dominic,

If your MCU ports are Callmanger controlled, they will use Skinny (SCCP) to communicate on TCP port 2000. Please see the following link.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801a62b9.shtml

Hope this helps. If so, please rate the post.

Brandon

1 REPLY

Re: Which Ports do MCU and Call Manager use for Video?

Dominic,

If your MCU ports are Callmanger controlled, they will use Skinny (SCCP) to communicate on TCP port 2000. Please see the following link.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801a62b9.shtml

Hope this helps. If so, please rate the post.

Brandon

117
Views
0
Helpful
1
Replies