Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

2821 VWIC problem configuring

Good day.

I have a 2821 with following hardware but i'm unable to begin the configuration of the VWIC for some reason. I thought it was IOS related but i'm using the same version of code else where.

Version:

c2800nm-spservicesk9-mz.124-25b.bin

Hardware config:

C2821 Motherboard with 2GE and integrated VPN Port adapter, 2 ports

Port adapter is analyzed

Port adapter insertion time 00:01:05 ago

EEPROM contents at hardware discovery:

Hardware Revision : 1.0

Top Assy. Part Number : 800-26921-04

Board Revision : E0

Deviation Number : 0

Fab Version : 03

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 87

Hardware date code : 20090709

MAC Address block size : 32

CLEI Code : COMV410ARA

Product (FRU) Number : CISCO2821

Part Number : 73-8853-05

Version Identifier : V05

EEPROM format version 4

PVDM Slot 0:

48-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card

Hardware Revision : 4.0

Part Number : 73-8540-05

Board Revision : C0

Deviation Number : 0

Fab Version : 04

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 00

Product (FRU) Number : PVDM2-48

Version Identifier : V01

EEPROM format version 4

WIC Slot 0:

VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1

Hardware Revision : 0.0

Top Assy. Part Number : 800-22628-05

Board Revision : C0

Deviation Number : 0

Fab Version : 04

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : VWIC2-1MFT-T1/E1

Version Identifier : V01

EEPROM format version 4

I've tried all of the following but nothing seems to work.

WIN-DC-VG01(config)#network-clock-participate ?

aim AIM Module

slot Network Module Slot

wic WIC Module

WIN-DC-VG01(config)#network-clock-participate slo

WIN-DC-VG01(config)#network-clock-participate slot ?

<1-2> Slot Number

WIN-DC-VG01(config)#network-clock-participate slot 1

Slot is empty or does not support clock participate

WIN-DC-VG01(config)#network-clock-participate slot 2

Slot is empty or does not support clock participate

WIN-DC-VG01(config)#network-clock-participate wi

WIN-DC-VG01(config)#network-clock-participate wic ?

<0-3> Slot Number (physical)

WIN-DC-VG01(config)#network-clock-participate wic 0

WIC slot is empty or does not support clock participate

WIN-DC-VG01(config)#network-clock-participate wic 1

WIC slot is empty or does not support clock participate

WIN-DC-VG01(config)#network-clock-participate wic 2

WIC slot is empty or does not support clock participate

WIN-DC-VG01(config)#network-clock-participate wic 3

WIC slot is empty or does not support clock participate

I see that i only have slot 1 and 2 available and the 'sh diag' references slot 0...not sure why.

Any help would be appreciated.

Thanks.

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: 2821 VWIC problem configuring

It looks like you need to enter the "card type" command to specify whether this is a T1 or E1 card.

-nick

JAW
Community Member

Re: 2821 VWIC problem configuring

I think the config help only shows arbitary values anyway

3 REPLIES

Re: 2821 VWIC problem configuring

It looks like you need to enter the "card type" command to specify whether this is a T1 or E1 card.

-nick

Community Member

Re: 2821 VWIC problem configuring

Worked perfectly thank you very much!

JAW
Community Member

Re: 2821 VWIC problem configuring

I think the config help only shows arbitary values anyway

1682
Views
0
Helpful
3
Replies
CreatePlease to create content