When our phones go into SRST mode, none of the 7961/7914 will go into SRST mode, they just continually say Registering. Here is a sh call-manager-fallback:
CONFIG (Version=4.0(0))
=====================
Version 4.0(0)
For on-line documentation please see:
www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm
ip source-address X.X.X.X port 2000
max-ephones 30
max-dn 96 dual-line
max-conferences 4 gain -6
dspfarm units 0
dspfarm transcode sessions 0
huntstop
no huntstop channel
voicemail 918005555555
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line mode is single
time-format 12
date-format mm-dd-yy
timezone 12 Eastern Standard/Daylight Time
secondary-dialtone 9
call-forward busy 918005555555
call-forward noan 918005555555 timeout 3
no call-forward pattern is configured.
no transfer-pattern is configured, transfer is restricted to local SCCP phones only.
keepalive 30
timeout interdigit 5
timeout busy 10
timeout ringing 180
caller-id name-only: enable
Limit number of DNs per phone:
7910: 36
7935: 36
7936: 36
7940: 6
7960: 20
7970: 36
Log (table parameters):
max-size: 150
retain-timer: 15
transfer-system full-consult
local directory service: enabled.
Reading through the SRST Manuals for 4.0 it says no additional configuration is necessary for the 7914. Any ideas?
Thanks
