Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AAA AAA AAA problem

dears,

i have connfigured my AS5400 as SS7 GW using this configuration:

aaa authentication login sanj_aaa1 group radius local none

aaa authentication ppp sanj_aaa1 group radius local none

aaa authorization exec sanj_aaa1 group radius local none

aaa authorization network sanj_aaa1 group radius local none

aaa accounting connection sanj_aaa1 start-stop group radius

voice class aaa 1

authentication method sanj_aaa1

authorization method sanj_aaa1

accounting method sanj_aaa1

radius-server attribute 6 on-for-login-auth

radius-server host 55.55.55.1 auth-port 1812 acct-port 1813 key 7 hello

radius-server timeout 50

radius-server deadtime 1

radius-server key 7 hello

radius-server vsa send accounting

radius-server vsa send authentication

gw-accounting aaa

gw-accounting aaa

-----------------------------------

but i recieved these error message:

*Jan 2 06:13:58.956: voip_rot_acct_supp_enabled: Rotary suppress disabled

*Jan 2 06:13:58.960: voip_update_ccapi_accounting(1465): WARNING: accounting start not send. return.

*Jan 2 06:13:58.984: get_acct_params(1466): ERROR: method "h323" not defined.

any help please...

3 REPLIES

Re: AAA AAA AAA problem

aaa accounting connection h323 start-stop group radius

this is the correct command.

New Member

Re: AAA AAA AAA problem

but i did not use h323 i am using SIP so also i need to add this command.... what about else it is correct.

thx......

Re: AAA AAA AAA problem

Even if you use SIP, the H323 AAA commands will do the job as well!

179
Views
0
Helpful
3
Replies