Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

About MPE & MCU Protocol

hi

I know MEP and MCU use follow protocol,but i don't knwo someone use which port because i wonder use firewall limit source ip access this

everybody can help me?

MPE protocol

• H.323 v4   TCP 1719、TCP 1720

• SIP (RFC 3261)  TCP 5060 or UDP 5060

• G.711  TCP 250

• G.729a

• Real-Time Transport Protocol (RTP)  udp 6970 to 6999

• RTP Payload for Dual Tone Multifrequency (DTMF]) Digits

• Session Description Protocol (SDP)

• LDAPv3 port 389

• SMTP (RFC 2821) tcp25

• SNMP Versions 1, 2c, and 3 port 161、162

• HTTPv1.1 TCP 80

• SSL Versions 2 and 3  TCP 22

• Network Time Protocol (NTP) Versions 3 and 4 UDP 123

MCU

H.323, T TCP 1719、TCP 1720

SIP, TCP 5060 or UDP 5060

H.235 (Advanced Encryption Standard [AES])

Secure Real-Time Transport Protocol (SRTP)  udp 5004

Transport Layer Security (TLS)

H.239 (dual video)

VNC port 5800、5900

Binary Floor Control Protocol (BFCP)

H.243 (chair control)

FTP  port 20/21

Real-Time Transport Protocol (RTP)  udp 6970 to 6999

(Real-Time Streaming Protocol (RTSP)  port 554

HTTP, Secure HTTP (HTTPS) port 443、445

Dynamic Host Configuration Protocol (DHCP) port 67/68、port 546/547

Simple Network Management Protocol (SNMP) port 161、162

Network Time Protocol (NTP), IPv4, and IPv6 UDP 123

Everyone's tags (3)
571
Views
0
Helpful
0
Replies
CreatePlease to create content