Can l connect the AIM-CUE which is inside the 2801 with CUCM the same way that l will connect to the CME. I have a computer which l dedicate for my callmanager 8.0 and l have cisco 2801 which l want to install the AIM-CUE into for my viocemail. The configuration that l have is for the CME, l need the setup for the CUCM for the AIM-CUE for the 2801 which l want to setup. Any advice from someone pls.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...