09-14-2007 03:50 PM
Dears,
i need to configure my Voice Gateway and PGW on my single switch i need my Voice Gateway & PGW
to talk with each other at vlan 3.........and at the same time i need Voice Gateway to talk with
other devices in VLAN 4 can i do this scenario if yes please let me know the procedures.do you have other solution than using VLANs?
please see the attached file for more details.....
09-21-2007 09:44 AM
The Catalyst 4224 includes an integrated eight-port Foreign Exchange Station (FXS) module to support devices such as analog phones, fax machines, and modems. The Catalyst 4224 shares a modular Voice Interface Card (VIC), and WAN Interface Card (WIC) with the Cisco 1600, 1700, 2600, and 3600 series platforms. This protects customer investment, streamlines operation costs associated with sparing of parts, and simplifies training
http://www.cisco.com/en/US/products/hw/switches/ps669/products_tech_note09186a00800947af.shtml
09-24-2007 03:33 PM
yo have many options to do that
1) you can configure the GW ( if is cisco)to work as a router, so, yo can create a sub interface int the fastethernet and create a trunk to the switch.
2) in the gateway have more than one interface, configure the other interface in the same vlan than the PGW.
3) if the PGW are running on any netra platform. you have 2 FE. configure one on the vlan3 and other in the vlan4.
Regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: