AS5350 h323 optional fields in SETUP-UUIE. How to find calling number ?
I have as5350 which is connected to Softswith platform of ZTE over h323.
ZTEs softswitch platform need to provide "calling number" information in h323 signaling, but I saw that the field that contain "caling number" is optional and as5350 did not provide information about this.
Actually Softswitch get calling number for CDRs from "sourceAddress-AliasAddress-dialedDigits" field.
1.My question is how i can "turn on" this optional field to contain dialed digits ?
2. If it is not possible I would like to know If there is another field that contain calling number information ?
AS5350 using IOS 12.4.9T1.
Setup-UUIE ::= SEQUENCE
h245Address TransportAddress OPTIONAL,
sourceAddress SEQUENCE OF AliasAddress OPTIONAL,
destinationAddress SEQUENCE OF AliasAddress OPTIONAL,
destCallSignalAddress TransportAddress OPTIONAL,
destExtraCallInfo SEQUENCE OF AliasAddress OPTIONAL, -- see Note
destExtraCRV SEQUENCE OF CallReferenceValue OPTIONAL, -- see Note
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...