09-27-2003 03:16 AM
Hi,
My problem is that in versions prior to 12.2(11)T, when the gateway issued a radius authentication request, the packet had the source port 1645, but in the newer IOS releases (including 12.3) the port varies (it starts by sending auth requests with the sport 21645 but after a while it sends requests with the sport 21646). I would like to know if anyone at cisco or whoever reads this can tell me how to make my 5350 to send a packet to the radius server with sport 1645 (or any sport but not varying).
Please don't ask me why I need this, I just do !
Thanks
09-28-2003 11:45 PM
Hi
try the following:
radius-server host xx.xx.xx.xx auth-port 1645 acct-port 1650
radius-server key xxxxxxxxxxxx
radius-server authorization permit missing Service-Type
09-29-2003 01:29 AM
It is set that way... the problem is that I need the packet leaving the gateway with source port 1645. Anyway, I have the answer now, thanks .. and for anyone interesed :
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCea72719&Submit=Search
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide