cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
606
Views
0
Helpful
1
Replies

AS5400 cnam delivery to sip phones

mike-singleton
Level 1
Level 1

I am using an as5400 hpx as a sip gateway. I am establishing a pri to a Nortel DMS-10 pstn switch. I do not get

calling name deliveried to sip phones from the pstn. After debugging q931 messages I find that calling name is being provided in a Facility message.

1 Accepted Solution

Accepted Solutions

scpage
Level 1
Level 1

Hi Mike,

Try configuring Buffered Calling-Name completion feature at the following url:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vvfax_c/callc_c/sip_c/sipc1_c/chapter4.htm#wp1425619

This allows the invite to be delayed by specified buffer-invite timer in order to await facility message with calling name information.

View solution in original post

1 Reply 1

scpage
Level 1
Level 1

Hi Mike,

Try configuring Buffered Calling-Name completion feature at the following url:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vvfax_c/callc_c/sip_c/sipc1_c/chapter4.htm#wp1425619

This allows the invite to be delayed by specified buffer-invite timer in order to await facility message with calling name information.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: