Hi,
we check the as5400 and we have follow setting. The CPU time is over 80% for 280 voice calls. it disables the some cache for current config. We would like to enable the cache to solve the high cpu loading issue. what command is better and what is the impact if we enable it? please advise
Best regards
----
no voice-fastpath enable
no ip dhcp use vrf connected
interface FastEthernet0/0
no ip route-cache cef
no ip route-cache
load-interval 30
speed auto
interface FastEthernet0/1
no ip route-cache cef
no ip route-cache
no ip mroute-cache
load-interval 30
speed auto
snmp-server community tw-12f RO
snmp-server community public RO
snmp-server community triver RO
snmp-server packetsize 2048
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps tty
snmp-server enable traps envmon
snmp-server host 192.168.10.200 tw-12f
snmp-server host 192.168.0.200 triver
snmp-server host 192.168.20.200 public
